Non – Regenerative IPMSM Drive Braking Scheme Based on q – Axis Current Component Limiting

  • Petar Matić Faculty of Electrical Engineering, University of Banja Luka, Banja Luka, Republic of Srpska, Bosnia and Herzegovina
  • Darko Marčetić Faculty of Technical Sciences, University of Novi Sad, Novi Sad, Serbia
Keywords: Interior Permanent Synchronos Motors (IPMSM); non-regenerative braking; q–axis current component limiting

Abstract

In the paper a non-regenerative braking scheme for high speed Interior Permanent Magnet Synchronous Motor (IPMSM) drive is presented. Due to price constraints, general purpose electric drives with IPMSMs are not equipped with a drive converter which allows energy recovery to the primary source. These drives are usually used for driving strictly reactive loads, in which braking mode is used only during deceleration. Therefore, in these drives it is necessary to use methods for dissipating braking energy in the motor itself and in the inverter. The paper provides theoretical analysis of various methods for non-regenerative IPMSM braking schemes, mathematical models, and the proposal of one solution suitable for use in high-speed applications based on limiting q – axis current component. Proposed solution controls recovery energy by keeping DC link voltage within given voltage margin, thus preventing unacceptable voltage rise during braking. Braking strategy is added into common IPMSM Field Oriented Control (FOC) control structure with Maximum Torque Per Ampere (MTPA) and Field Weakening (FW) algorithms. During the braking, MTPA strategy is suspended and non – regenerative braking is performed instead. In the proposed braking scheme voltage margin is also taken into account, by selecting proper d-axis reference current adjusted to the available voltage, so the scheme is also applicable in FW mode.

Published
2017-12-14
Section
Original Research Papers